corn snake pet2424

This video will go over how to replace and even test a smoke unit in your Taigen tank. The tank used in this video is a Tiger 1 tank, but the process is the same for all the tanks:
- Unscrew the 2-3 screws holding the smoke unit in place.
- Remove the exhaust hoses from the unit or tank exhausts ports.
- Disconnect the smoke unit cord from the motherboard.
- Replace unit

Please make sure when testing your smoke unit to stay between 6-9V.

Hello everyone,
Here is a quick (somewhat) video of how to remove the toolboxes on the KV-1 tank. Since our toolboxes are metal, we will start by cutting the glue from the pins on the bottom side of the top hull as shown in the video. Make sure you separate it well, you can always fill it in later.
Next, we will use either a heat gun or a blow dryer (ask your gf or wife first or you might be down a tank) to heat tool box pins up. Make sure to keep the hot air moving and to not concentrate on one spot or you could warp your tank. Use your hand like I did in this video to gauge how hot it is. After you warm it up you should be able push the toolbox out of the hull like I did.
Be careful not to burn yourself like I did in this video. I got burnt twice by the same item lol.

This is our Taigen early version Tiger 1 kit. It comes with an airsoft unit, infrared unit, and steel gearboxes so you know you are set no matter what path you chose to go down. Swapping the airsoft to infrared or vice-versa is pretty simple once you build it! Also with the provided ALL ENGLISH instructions and HD photos you should have no problem building this even as a beginner!