corn snake pet2424

This is a small explanation on how to upgrade your plastic rear idler wheels to the metal versions. You can use a screw driver or an appropriate drill bit to drill through the frame, then use the provided E-Clip with the upgrade to secure the wheel in place.
Congratulations!

Hello tankers,
I figured a "Welcoming to tanking" video was well due, so here you are. This is for the new people to the hobby, for those who are totally new. This shows what to do when you get a tank, how to bind, what things do, etc.

Hello everyone,
Here is a quick (somewhat) video of how to remove the toolboxes on the KV-1 tank. Since our toolboxes are metal, we will start by cutting the glue from the pins on the bottom side of the top hull as shown in the video. Make sure you separate it well, you can always fill it in later.
Next, we will use either a heat gun or a blow dryer (ask your gf or wife first or you might be down a tank) to heat tool box pins up. Make sure to keep the hot air moving and to not concentrate on one spot or you could warp your tank. Use your hand like I did in this video to gauge how hot it is. After you warm it up you should be able push the toolbox out of the hull like I did.
Be careful not to burn yourself like I did in this video. I got burnt twice by the same item lol.

Hey tankers,
Here is a quick Torro King Tiger unboxing. It features:
metal chassis (torsion bar suspension)
metal caterpillar tracks
metal road wheels
metal drive wheels
metal idler wheels
metal turret
metal barrel
metal muzzle
metal exhausts
various metal accessories
steel 4:1 gearboxes

The tank is RTR and comes with a 2.4GHz radio. A smoke unit, speaker, and recoil are extra included features for the tank. It also comes with either an airsoft or infrared firing unit. More information can be found at www.TaigenTanks.com

Here is a quick video on how to remove or replace the hatch hinges on your Tiger 1 tank. Sometimes only the hinges break, but the replacements come with the hatch and hinge. Instead of replacing both and needing to paint the hatch, you can instead replace the hinge and not worry about repainting!